SMC Networks SMC6608M Manual de usuario descargar pdf (Pagina 67)

Spanning Tree Configuration

The Spanning Tree Protocol (STP) is used to detect and disable

network loops and to provide link back-up. It requires certain

parameter settings. The factory default settings (See Figure 4-6)

should be acceptable in most networks. To change the default

settings, proceed as follows:

Figure 4-7. Spanning Tree Configuration Screen

1. Highlight “Spanning Tree Configuration” in the Main

Menu and press <ENTER>. This will access the configura-

tion screen illustrated above.

2. Highlight “Spanning Tree Algorithm” and press <ENTER>

to use the arrow keys to toggle between enabling and

disabling STP. Press <ENTER> again to confirm the choice.

3. Highlight “Priority” and press <ENTER> to input a priority

value (0 to 65535) for the switch. Press <ENTER> again to

confirm the chosen value.

CONFIGURATION AND MANAGEMENT

4-16

Spanning Tree Configuration

Yes

Priority 32768 Maximum Message Age 20

Hello Time 2 Forward Delay 15

Port Priority Path Cost

1 128 10

2 128 10

3 128 10

4 128 10

5 128 10

6 128 10

7 128 10

8 128 10

Return to Previous Menu Take Effect Immediately

Use cursor keys to choose item. Press <ENTER> to confirm choice.

Press <CTRL><N> to return to the Main Menu

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 112 113

Sin comentarios

SMC Networks SMC6608M Manual de usuario Pagina 67