SMC Networks TigerSwitch Manual de usuario Pagina 423

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 518
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 422
A
DDRESS
T
ABLE
C
OMMANDS
4-181
show mac-address-table
This command shows classes of entries in the bridge-forwarding database.
Syntax
show mac-address-table [address mac-address [mask]] [interface
interface] [vlan vlan-id] [sort {address | vlan | interface}]
mac-address - MAC address.
mask - Bits to match in the address.
interface
- ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
- port-channel channel-id (Range: 1-4)
vlan-id - VLAN ID (Range: 1-4094)
sort - Sort by address, vlan or interface.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following
types:
- Learned - Dynamic address entries
- Permanent - Static entry
- Delete-on-reset - Static entry to be deleted when system is reset
The mask should be hexadecimal numbers (representing an equivalent
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified
MAC address. Enter hexadecimal numbers, where an equivalent
binary bit “0” means to match a bit and “1” means to ignore a bit. For
example, a mask of 00-00-00-00-00-00 means an exact match, and a
mask of FF-FF-FF-FF-FF-FF means “any.”
The maximum number of address entries is 8191.
Vista de pagina 422
1 2 ... 418 419 420 421 422 423 424 425 426 427 428 ... 517 518

Comentarios a estos manuales

Sin comentarios