SMC Networks TigerSwitch Manual de usuario Pagina 134

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 518
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 133
C
ONFIGURING
THE
S
WITCH
3-84
3. Permit all TCP packets from class C addresses 192.168.1.0 with the
TCP control code set to “SYN.”
Configuring a MAC ACL
Command Attributes
Action – An ACL can contain any combination of permit or deny
rules.
Source/Destination Address Type – Use “Any” to include all
possible addresses, “Host” to indicate a specific MAC address, or
“MAC” to specify an address range with the Address and Bitmask
fields. (Options: Any, Host, MAC; Default: Any)
Source/Destination MAC Address – Source or destination MAC
address.
Source/Destination Bitmask – Hexidecimal mask for source or
destination MAC address.
VID – VLAN ID. (Range: 1-4094)
Ethernet Type – This option can only be used to filter Ethernet II
formatted packets. (Range: 0-65535)
A detailed listing of Ethernet protocol types can be found in RFC
1060. A few of the more common types include 0800 (IP), 0806 (ARP),
8137 (IPX).
Console(config-ext-acl)#permit 10.7.1.1 255.255.255.0 any 4-123
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
destination-port 80
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
control-flag 2 2
Console(config-std-acl)#
Vista de pagina 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 517 518

Comentarios a estos manuales

Sin comentarios