Smc-networks SMC2555W-AG Manual de usuario descargar pdf (Pagina 102)

System Configuration

5-46

CLI Commands for the 802.11a Wireless Interface – From the

global configuration mode, enter the interface wireless g

command to access the 802.11g radio interface. Set the interface

SSID using the ssid command and, if required, configure a name

for the interface using the description command. You can also

use the no ssid-broadcast command to stop sending the SSID

in beacon messages. Select a radio channel or set selection to

Auto using the channel command. Set any other parameters as

required. To view the current 802.11g radio settings, use the

show interface wireless g command.

SMC-AP(config)#interface wireless g 6-68

Enter Wireless configuration commands, one per line.

SMC-AP(if-wireless g)#description RD-AP#3 6-75

SMC-AP(if-wireless g)#ssid r&d 6-79

SMC-AP(if-wireless g)#channel auto 6-77

SMC-AP(if-wireless a)#ssid-broadcast 6-75

SMC-AP(if-wireless g)#select-antenna-mode right antenna 6-74

SMC-AP(if-wireless g)#radio-mode g 6-73

SMC-AP(if-wireless a)#transmit-power full 6-87

SMC-AP(if-wireless g)#speed 6 6-76

SMC-AP(if-wireless g)#max-association 32 6-88

SMC-AP(if-wireless g)#beacon-interval 150 6-79

SMC-AP(if-wireless g)#dtim-period 5 6-80

SMC-AP(if-wireless g)#fragmentation-length 512 6-81

SMC-AP(if-wireless g)#rts-threshold 256 6-82

SMC-AP(if-wireless g)#exit

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 255 256

Sin comentarios

Smc-networks SMC2555W-AG Manual de usuario Pagina 102