Smc-networks BARRICADE SMC7901WBRA2 B1 Manual de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
C
HAPTER
8
| Firewall Configuration
Port Forwarding
– 92 –
PORT FORWARDING
Port forwarding (sometimes referred to as tunneling) is the act of
forwarding a network port from one network node to another. This
technique can allow an external user to reach a port on a private IP
address (inside a LAN) from the outside through a NAT-enabled router.
(Maximum 32 entries are allowed.)
Figure 49: Port Forwarding Settings
The following items are displayed on this page:
Port Forwarding — Selects between enabling or disabling port
forwarding on the unit. (Default: Disable)
Apply Changes — Applies the port forwarding selection.
Protocol — Specifies a protocol to use for port forwarding, either TCP,
UDP or both.
Comment — Enter a useful comment to help identify the forwarded
port service on the network.
Enable — Checking this box activates the parameters configurated
once added to the Current Port Forwarding Table. (Default: Enabled)
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 149 150

Comentarios a estos manuales

Sin comentarios