Smc-networks BARRICADE SMC7901WBRA2 B1 Manual de usuario Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
C
HAPTER
5
| WAN Configuration
Channel Configuration
– 60 –
CURRENT ATM VC
TABLE
The Current ATM VC Table is a display only table of the configured
parameters used to communincate with the remote ATM switch.
Select — Selects the configured connection.
Inf — Displays a virtual interface.
Mode — Displays the channel mode employed by the link.
VPI — Displays the virtual path identifyer (VPI) of the link.
VCI — Displays the virtual vircuit identifyer (VCI) of the link.
Encapt — Displays the encapsulation used.
NAPT — Displays the network address port translation (NAPT).
IP Addr — Displays the IP address of the link.
Remote IP — Displays the remote IP address of the link.
Subnet Mask — Displays the subnet mask.
User Name — Displays the user name.
DRoute — Dipslays if a default route (DRoute) has been enabled.
Status — Displays if the link is enabled or disabled.
Actions — Gives the options to edit the link information using the
pencil icon, or delete the link using the trashcan icon.
ACTIONS - EDIT
Clicking the pencil icon in the Current ATM VC Table opens a new window
that allows you to edit some of the parameters of the preconfigured link.
The example shown below displays a bridged interface.
Figure 25: Editing a bridged entry in the Current ATM VC Table
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 149 150

Comentarios a estos manuales

Sin comentarios