Smc-networks BARRICADE SMC7901WBRA2 B1 Manual de usuario Pagina 123

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 122
C
HAPTER
10
| Advanced Configuration
SNMP Protocol Configuration
– 123 –
SNMP PROTOCOL CONFIGURATION
Simple Network Management Protocol (SNMP) is a communication protocol
designed specifically for managing devices on a network. SNMP is typically
used to configure devices for proper operation in a network environment,
as well as to monitor them to evaluate performance or detect potential
problems.
The ADSL Router can be managed locally or remotely by SNMP.
Figure 75: SNMP Configuration
The following items are displayed on this pages:
SNMP — Enables/disables SNMP. (Default: Enabled)
System Description — A name given to identify the ADSL Router.
System Contact — The name of the system contact person.
System Name — A description of the unit. (Default: Wireless ADSL
Modem/Router)
System Location — The location of the ADSL Router.
System Object ID — The object ID of the unit which identifies the
vendor’s network.
Trap IP Address — Destination IP address of the SNMP trap.
Community name (read-only) — Name of the read-only community.
This read-only community allows read operation to all objects in the
Management Information Base (MIB).
Vista de pagina 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 149 150

Comentarios a estos manuales

Sin comentarios