Smc-networks TigerStack 100 1000BASE-X Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
C
ONFIGURING
THE
S
WITCH
2-37
Configuring STA for Ports
The following figure and table describe port STA configuration.
Spanning Tree Port Configuration : Unit 1 Port 1 - 12
================================
Fast forwarding on all ports : [Enable] [Disable]
Port Type Priority Cost FastForwarding
-----------------------------------------------------
1 100FX 128 19 ENABLED
2 100FX 128 19 ENABLED
3 100FX 128 19 ENABLED
4 100FX 128 19 ENABLED
5 100FX 128 19 ENABLED
6 100FX 128 19 ENABLED
7 100FX 128 19 ENABLED
8 100FX 128 19 ENABLED
9 100FX 128 19 ENABLED
10 100FX 128 19 ENABLED
11 100FX 128 19 ENABLED
12 100FX 128 19 ENABLED
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
other keys to make changes.
Parameter Default Description
Fast forwarding
on all ports
Enabled See “FastForwarding” in this table.
Type Shows port type as:
100FX : 100BASE-FX
1000SX : 1000BASE-SX
1000LX : 1000BASE-LX
1000T : 1000BASE-T
Priority 128 Defines the priority for the use of a port in the STA
algorithm. If the path cost for all ports on a switch are
the same, the port with the highest priority (i.e., lowest
value) will be configured as an active link in the
Spanning Tree. Where more than one port is assigned
the highest priority, the port with lowest numeric
identifier will be enabled. The range is 0 - 255.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 177 178

Comentarios a estos manuales

Sin comentarios