Smc-networks TigerStack 100 1000BASE-X Manual de usuario descargar pdf (Pagina 147)

ORT

RUNK

ONFIGURATION

3-53

The MT-RJ ports used for one side of a trunk must all be on the same

internal switch chip. The port groups permitted include:

The 100BASE-FX SC-type fiber ports used for one side of a trunk must all

be on the same module. However, the 1000BASE-X ports used for one

side of a trunk may be on any switch in the stack, or both on the same

switch if used standalone.

For example, when using Gigabit ports to form a trunk within a stack, the

Gigabit ports will all be at Port 25. In this case, you could specify a trunk

group consisting of:

(Unit1-Port25, Unit2-Port25, Unit3-Port25, Unit4-Port25),

or two trunks consisting of:

(Unit1-Port25, Unit2-Port25) and (Unit3-Port25, Unit4-Port25).

Group 1 Group 2 Group 3

1,2,3,4,

13,14,15,16

5,6,7,8,

17,18,19,20

9,10,11,12,

21,22,23,24

Media Module

100BASE-FX Any ports on a single module.

1000BASE-X Up to four Gigabit ports from any switch in the stack, or both

Gigabit ports on two modules installed in a standalone switch.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 177 178

Sin comentarios

Smc-networks TigerStack 100 1000BASE-X Manual de usuario Pagina 147