Smc-networks TigerStack 100 1000BASE-X Manual de usuario descargar pdf (Pagina 107)

SNMP C

ONFIGURATION

3-13

SNMP Configuration

Use the SNMP Configuration screen to display and modify parameters for

the Simple Network Management Protocol (SNMP). The stack should

includes an SNMP agent module which monitors the status of its

hardware, as well as the traffic passing through its ports. A computer

attached to the network, called a Network Management Station (NMS),

can be used to access this information. Access rights to the agent module

are controlled by community strings. To communicate with the switch, the

NMS must first submit a valid community string for authentication. The

options for configuring community strings and related trap functions are

described in the following figures and table.

SNMP Community

The following figure and table describe how to configure the community

strings authorized for management access. Up to 5 community names may

be entered.

Parameter Description

SNMP Community

Capability

Up to 5 community strings may be used.

Community String A community entry authorized for management access.

(The maximum string length is 20 characters.)

Access Mode Management access is restricted to Read Only or Read/

Write.

Add/Remove Add/remove strings from the active list.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 177 178

Sin comentarios

Smc-networks TigerStack 100 1000BASE-X Manual de usuario Pagina 107