Smc-networks 16 10BASE-T Manual de usuario descargar pdf (Pagina 275)

SNMP Commands

4-99

SNMP Commands

Controls access to this switch from management stations using the Simple Network

Management Protocol (SNMP), as well as the error types sent to trap managers.

snmp-server community

This command defines the community access string for the Simple Network

Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [ro|rw]

no snmp-server community string

• string - Community string that acts like a password and permits access to

the SNMP protocol. (Maximum length: 32 characters, case sensitive;

Maximum number of strings: 5)

• ro - Specifies read-only access. Authorized management stations are only

able to retrieve MIB objects.

• rw - Specifies read/write access. Authorized management stations are able

to both retrieve and modify MIB objects.

Default Setting

• public - Read-only access. Authorized management stations are only able to

retrieve MIB objects.

• private - Read/write access. Authorized management stations are able to both

retrieve and modify MIB objects.

Command Mode

Global Configuration

Command Usage

The first snmp-server community command you enter enables SNMP

(SNMPv1). The no snmp-server community command disables SNMP.

Table 4-38. SNMP Commands

Command Function Mode Page

snmp-server community Sets up the community access string to permit access to

SNMP commands

GC 4-99

snmp-server contact Sets the system contact string GC 4-100

snmp-server location Sets the system location string GC 4-100

snmp-server host Specifies the recipient of an SNMP notification operation GC 4-101

snmp-server enable traps Enables the device to send SNMP traps (i.e., SNMP

notifications)

GC 4-102

show snmp Displays the status of SNMP communications NE, PE 4-102

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 383 384

Sin comentarios

Smc-networks 16 10BASE-T Manual de usuario Pagina 275