SMC Networks SMC2804WBR V.2 Manual de usuario descargar pdf (Pagina 14)

Connect the System

Attach to Your Network Using Radio Signals

Install a wireless network adapter in each computer that will be

connected to the Internet or your local network via radio signals.

SMC currently offers several wireless network cards, including

the

SMC2802W and SMC2835W wireless cards.

Rotate both antennas on the back of the Wireless Barricade™

to the desired position. For more effective coverage, position

the antennas around 45 to 90 degrees apart. Try to place the

Wireless Barricade™ in a position that is located in the center

your wireless network. Normally, the higher you place the

antenna,

the better the performance. Ensure that the Wireless

Barricade™’s location provides optimal reception throughout

your home or office.

Computers equipped with a wireless adapter can communicate

with each other as an independent wireless LAN by configuring

each computer to the same radio channel. However, the Wireless

Barricade™ can provide access to your wired/wireless LAN or

to the Internet for all wireless workstations. Each wireless PC

in this network infrastructure can talk to any computer in the

wireless group via a radio link, or access other computers or

network resources in the wired LAN infrastructure or over

the Internet via the Wireless Barricade™.

The wireless infrastructure configuration not only extends the

accessibility of wireless PCs to the wired LAN, but also increases

the effective wireless transmission range for wireless PCs by

retransmitting incoming radio signals through the Wireless

Barricade™.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 93 94

Sin comentarios

SMC Networks SMC2804WBR V.2 Manual de usuario Pagina 14