SMC Networks SMC8013WG Manual de usuario

EZ Connect™ Wireless Cable Modem GatewayInstall GuideSMC8013WG

CHAPTER 4 | Configuring your Computer The information outlined in this chapter will guide you through the configuration for the following Operating S

4.2 | Configuring Windows 2000 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel] 2. In the C

4.3 | Configuring Windows XP The following instructions assume you are running Windows XP with the default interface. If you are using the Classic in

CHAPTER 5 | Configuring the Wireless Cable Modem Gateway After you have configured TCP/IP on a client computer, use a web browser to configure the

5.3 | Accessing the Wireless Cable Modem Gateway’s Web Management To access the Wireless Cable Modem Gateway’s web-based management screens, follow t

CHAPTER 6 | Navigating the Web-based Administration The EZ Connect™ Wireless Cable Modem Gateway’s management interface allows you to configure both

6.4 | LAN From this section you can configure the following settings: • The private LAN settings, including the IP address of your Wireless Cable M

IP Address Pool A dynamic IP start address may be specified by the user, e.g. 10.1.10.1 (default value). Once this start IP address has been assigned,

Predefined Service The Predefined Service option has a pull-down menu with several popular Service Applications, such as HTTP (80), FTP (20/21), and A

2. Configure the Traffic or Data [Type] that you want to forward 3. Set the [LAN Server IP] of the PC that you want this traffic/data redirected to

Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for

6.7 | Firewall The Wireless Cable Modem Gateway provides a stateful inspection firewall (SPI), which is designed to protect against Denial of Service

Configuring a Predefined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the Pred

Configuring a Customer Defined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the

6.7.2 | Special Application Some applications, such as Internet gaming, videoconferencing, Internet telephony and others, require multiple connections

8. When your configuration is complete, click the [Apply] button to save your changes and return to the main Special Application page. 6.7.3 | URL B

6.7.4 | Schedule Rule This feature will block Internet content based on the URL blocking function for PCs on your network based on the day and or time

6.7.6 | DMZ Host (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can

6.9 | Status The Status screen displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as

The Cable Modem System Event Log shows diagnostic information about your connection and cable system. The Cable Status page shows the users the in

APPENDIX A | CLI Commands Command PING: "ping IP/FQDN x" Description: Pings the destination by IP or FQDN (full qualify domain name, e.g.

TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know the Wireless C

Command SNIFF: "sniff [u|d|u+d] x [0|1]" Description: Sniff the upstream/downstream/upstream & downstream for x seconds and display the

Command ARP: "arp <[ether|cable]> <IP>" Description: If there is no parameter specified for the ARP command, CM would display t

Command DHCPSHOW: "dhcpShow" Description: This command is used to show the current dhcp lease info, including the IP, MAC and status (onlin

APPENDIX B | Troubleshooting This appendix describes common problems you may encounter and possible solutions to them. B.1 | Verify you are connecte

B.3 | I have another IP Address displayed If you have another IP address listed, then the PC may not be configured for a DHCP connection. Please refer

B.4 | Pinging the Wireless Cable Modem Gateway To verifying Your TCP/IP Connection is configured properly and you are able to access the Wireless Cab

B.5 | Symptom / Action Troubleshooting The Gateway can be easily monitored through panel indicators to identify problems. Please refer to Chapter 2 –

APPENDIX C | Technical Specifications Standards • 802.3 10BaseT Ethernet • 802.3u 100BaseTX Fast Ethernet • 802.11b WAN Interface • F-type RF C

APPENDIX C | Compliances FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device p

APPENDIX D | Technical Support PHONE From U.S.A. and Canada (24 hours a day, 7 days a week) • (800) SMC-4-YOU • (949) 679-8000 • Fax: (949) 679-

CHAPTER 1 | Introduction Congratulations on your purchase of the EZ Connect™ Wireless Cable Modem Gateway. SMC is proud to provide you with a powerfu

SMC Networks, Inc. 38 Tesla Irvine, CA 92618 Rev. 1.0 – Comcast User SMC8013WG

1.2 | Package Contents Before installing the EZ Connect™ Wireless Cable Modem Gateway, verify that you have the items listed under below. Also be sur

CHAPTER 2 | Getting to Know the Wireless Cable Modem Gateway The EZ Connect™ Wireless Cable Modem Gateway is the perfect all in one solution, for t

2.2 | Rear Panel Description Item Description Power Connect the included power adapter to this port. Reset Use this button to reset the power or

CHAPTER 3 | Installation The EZ Connect™ Wireless Cable Modem Gateway can be installed in any location where you have cable internet access, and the

3.2 | Basic Installation Procedure 1. Connect the LAN: You can connect the Wireless Cable Modem Gateway to your PC, or to a hub or switch. Run Ether