SMC Networks SMC2582W-B Manual de usuario descargar pdf (Pagina 38)

algorithm setting is provided for better compatibility with wireless client computers with various

WLAN network adapters.There are three options available,including Open System,Shared Key, and

Auto.

When WEP is enabled by a security mode,the Key length can be specified to be 64 Bits or 128

Bits. The Selected key setting specifies the key to be used as a send-key for encrypting traffic

from the local device side to the remote device side.All 4 WEP keys are used as receive-keys to

decrypt traffic from the remote device side to the local device side.

NOTE: Each field of a WEP key setting is a hex-decimal number from 0-9,A-F.For

example,when the security mode is Static WEP and the key length is 64 Bits,you

could set Key 1 to “00012E3ADF”.

3.5.2.2. MAC-Address-Based Access Control

Fig. 46.MAC-address-based access control settings.

With MAC-Address-Based Access Control, you can specify the wireless clients (STAs or Bridge

Slaves) that are permitted or not permitted to associate with the SMC2582W-B.When the table

type is set to inclusive,entries in the table are permitted to associate with the SMC2582W-B.

When the table type is set to exclusive,entries in the table are not permitted to associate with the

SMC2582W-B.

NOTE: MAC-address-based access control is only available when the SMC2582W-B is in

AP or Bridge Master mode.

To deny wireless clients’ access to the wireless network:

1. Select Enabled from the Functionality drop-down list.

2. Set the Access control type to exclusive.

3. Specify the MAC address of a wireless client to be denied access,and then click Add.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Sin comentarios

SMC Networks SMC2582W-B Manual de usuario Pagina 38