SMC Networks SMC6724L3 Manual de usuario descargar pdf (Pagina 309)

Use this command to set the number of the stop bits transmitted per byte.

Use the no form to restore the default setting.

stopbits {1 | 2}

• 1 - One stop bit

• 2 - Two stop bits

Default Setting

Command Mode

Line Configuration

To specify 2 stop bits, enter this command:

Use this command to display the terminal line’s parameters.

show line [console | vty]

• console - Console terminal line.

• vty - Virtual terminal for remote console access (i.e., Telnet).

Default Setting

Shows all lines

Command Mode

Normal Exec, Privileged Exec

Console(config-line)#stopbits 2

Console(config-line)#

Sin comentarios

SMC Networks SMC6724L3 Manual de usuario Pagina 309