SMC Networks L2-Lite Manual de usuario descargar pdf (Pagina 87)

100

101

Simple Network Management Protocol

3-39

Enabling the SNMP Agent

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).

Command Attributes

SNMP Agent Status – Enables SNMP on the switch.

Web – Click SNMP, Agent Status.

Figure 3-24 Enabling SNMP Agent Status

CLI – The following example enables SNMP on the switch.

Setting Community Access Strings

You may configure up to five community strings authorized for management access

by clients using SNMP v1 and v2c. All community strings used for IP Trap Managers

should be listed in this table. For security reasons, you should consider removing the

default strings.

Command Attributes

• SNMP Community Capability – The switch supports up to five community strings.

• Current – Displays a list of the community strings currently configured.

• Community String – A community string that acts like a password and permits

access to the SNMP protocol.

Default strings: “public” (read-only), “private” (read/write)

Range: 1-32 characters, case sensitive

• Access Mode

- Read-Only – Authorized management stations are only able to retrieve MIB

objects.

- Read/Write – Authorized management stations are able to both retrieve and

modify MIB objects.

Console(config)#snmp-server 4-62

Console(config)#

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 613 614

Comentarios a estos manuales

Sin comentarios

SMC Networks L2-Lite Manual de usuario Pagina 87

Comentarios a estos manuales

Relacionado con productos y manuales para Software SMC Networks L2-Lite