SMC Networks SMC2482W Manual de usuario descargar pdf (Pagina 31)

6.2 | Configure WEP using Web-based Utility

1. Log into the SMC2482W Web-based Utility.

(See section 4.2 for more information)

2. Click on [Advanced Setup] link.

3. Click on [Wireless] link on the left hand navigation menu,

and then select the [Encryption] option.

4. To enable WEP,choose the WEP key length you want to use.

5. Then set the WEP key format.

6. Enter in the WEP key you want to use,based on the key

length and format.

7. Select the WEP key you want to use by clicking the button

next to the Key number.

8. When you have completed configuring these settings,click

the [APPLY] button to save the settings and reboot the

Wireless Bridge.

Note: Once you enable WEP,please make sure you have the

same settings configured on all the Wireless Bridges that

you are using to connect each location.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Sin comentarios

SMC Networks SMC2482W Manual de usuario Pagina 31