Smc-networks SMC7804WBRA Manual de usuario descargar pdf (Pagina 47)

ONFIGURING

THE

ARRICADE

4-4

Parameter Setting

Select your Country and Internet Service Provider. This will automatically

configure the Barricade with the correct Protocol, Encapsulation and

VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed you will need to

manually enter settings. Go to “Parameter Setting - Country or ISP Not

Listed” on page 4-7 in the manual.

If your ISP uses Protocols PPPoA or PPPoE you will need to enter the

username, password and DNS Server address supplied by your ISP.

If your ISP uses Protocol RFC1483 Routed you will need to enter the IP

address, Subnet Mask, Default Gateway and DNS Server address supplied

by your ISP.

Note: By default 192.168.2.1 is set for the DNS Server address, this

needs to be changed to reflect your ISP’s DNS Server address.

Click “NEXT” to continue.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 123 124

Sin comentarios

Smc-networks SMC7804WBRA Manual de usuario Pagina 47