Smc-networks BARRICADE SMCWBR14-N2 Manual de usuario descargar pdf (Pagina 37)

Advanced_Routing

Add/Edit Route

Adds a new route to the IP routing table or edits an existing route.

Enable: Specifies whether the entry will be enabled or disabled.

Destination IP: The IP address of packets that will take this route.

Netmask: One bits in the mask specify which bits of the IP address must match.

Gateway: Specifies the next hop to be taken if this route is used. A gateway of 0.0.0.0 implies

there is no next hop, and the IP address matched is directly connected to the router on the

interface specified: LAN or WAN.

Interface: Specifies the interface -- LAN or WAN -- that the IP packet must use to transit out of

the router, when this route is used.

Metric: The route metric is a value from 1 to 16 that indicates the cost of using this route. A

value of 1 is the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is

not reachable from this router. When trying to reach a particular destination, computers on your

network will select the best route, ignoring unreachable routes.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 102 103

Sin comentarios

Smc-networks BARRICADE SMCWBR14-N2 Manual de usuario Pagina 37