Smc-networks ADSL Barricade SMC7204BRA Manual de usuario descargar pdf (Pagina 118)

Adding EOA Interfaces

119

Click [Add]. The [EOA Interface – Add] page appears, as

shown in Figure 41.

Figure 41. EOA Interface – Add Page

Select one of the predefined interface names from the [EOA

Interface:] drop down list.

From the [Interface Sec Type:] drop-down list, select the level

of IP Firewall to be used on this interface, as defined on page

116.

In the [Lower Interface:] field, select the lower-level interface

name over which this protocol is being configured. If you are

using the ADSL Barricade as a bridge only, skip to step 10.

If you are using the ADSL Barricade as a router on

your LAN,

enter the IP address for the interface in the [Conf. IP

Address:]

field, and enter the network in the [Netmask:]. This address

serves as the public IP address for your entire LAN and is

usually assigned by your ISP.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 203 204

Sin comentarios

Smc-networks ADSL Barricade SMC7204BRA Manual de usuario Pagina 118