Smc-networks SMC TigerStack IV SMC6224M Manual de usuario Pagina 432

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 522
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 431
C
OMMAND
L
INE
I
NTERFACE
4-184
Default Setting
2 seconds
Command Mode
Global Configuration
Command Usage
This command sets the time interval (in seconds) at which the root
device transmits a configuration message.
Example
spanning-tree max-age
This command configures the spanning tree bridge maximum age globally
for this switch. Use the no form to restore the default.
Syntax
spanning-tree max-age seconds
no spanning-tree max-age
seconds - Time in seconds. (Range: 6-40 seconds)
The minimum value is the higher of 6 or [2 x (hello-time + 1)].
The maximum value is the lower of 40 or [2 x (forward-time - 1)].
Default Setting
20 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) a device can wait
without receiving a configuration message before attempting to
reconfigure. All device ports (except for designated ports) should
receive configuration messages at regular intervals. Any port that ages
out STA information (provided in the last configuration message)
becomes the designated port for the attached LAN. If it is a root port,
Console(config)#spanning-tree hello-time 5
Console(config)#
Vista de pagina 431
1 2 ... 427 428 429 430 431 432 433 434 435 436 437 ... 521 522

Comentarios a estos manuales

Sin comentarios