Smc-networks SMC Tiger 10/100 SMC6128L2 Manual de usuario Pagina 171
- Pagina / 606
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
P
ORT
C
ONFIGURATION
3-117
CLI – This example creates trunk 2 with ports 1 and 2. Just connect these
ports to two static trunk ports on another switch to form a trunk.
Enabling LACP on Selected Ports
Command Usage
• To avoid creating a loop in the
network, be sure you enable LACP
before connecting the ports, and also
disconnect the ports before disabling
LACP.
• If the target switch has also enabled
LACP on the connected ports, the
trunk will be activated automatically.
Console(config)#interface port-channel 2 4-144
Console(config-if)#exit
Console(config)#interface ethernet 1/1 4-144
Console(config-if)#channel-group 1 4-164
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#channel-group 1
Console(config-if)#end
Console#show interfaces status port-channel 1 4-151
Information of Trunk 1
Basic information:
Port type: 1000T
Mac address: 00-00-E8-AA-AA-01
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full, 1000full,
Flow control: Disabled
Port security: Disabled
Max MAC count: 0
Port security action: None
Current status:
Created by: User
Link status: Down
Operation speed-duplex: 1000full
Flow control type: None
Member Ports: Eth1/1, Eth1/2,
Console#
active
links
}
}
dynamically
enabled
configured
members
backup
link
- TigerSwitch 10/100 1
- Management Guide 3
- Glossary 21
- NTRODUCTION 31
- ESCRIPTION 33
- System Defaults 37
- Required Connections 42
- ONNECTING 43
- Basic Configuration 44
- Setting Passwords 45
- Setting an IP Address 46
- Dynamic Configuration 47
- Saving Configuration Settings 51
- Managing System Files 52
- AVIGATING 57
- Panel Display 58
- Main Menu 59
- Manual Configuration 75
- Using DHCP/BOOTP 76
- Enabling Jumbo Frames 77
- Managing Firmware 78
- Console Port Settings 83
- Telnet Settings 86
- Configuring Event Logging 88
- System Log Configuration 89
- Remote Log Configuration 91
- Simple Mail Transfer Protocol 93
- Resetting the System 95
- Setting the System Clock 96
- Setting the Time Zone 97
- ONFIGURING 100
- Command Attributes 101
- Command Usage 103
- ANAGEMENT 105
- Setting the Local Engine ID 106
- Specifying a Remote Engine ID 107
- Configuring SNMPv3 Users 108
- Configuring SNMPv3 Groups 114
- Setting SNMPv3 Views 119
- User Authentication 121
- Configuring User Accounts 122
- UTHENTICATION 123
- Configuring HTTPS 128
- Configuring the Secure Shell 131
- Configuring the SSH settings 133
- Field Attributes 133
- Generating the Host Key Pair 135
- Configuring Port Security 140
- Displaying 802.1X Statistics 149
- Statistical Values 149
- Access Control Lists 151
- Setting the ACL Name and Type 152
- Configuring a Standard IP ACL 153
- Console(config-std-acl)# 157
- Console(config-mac-acl)# 158
- Filtering Management Access 160
- Port Configuration 162
- Field Attributes (CLI) 163
- Basic information: 163
- Configuration: 163
- Current status: 164
- Creating Trunk Groups 167
- Configuring LACP Parameters 173
- ONFIGURATION 175
- Displaying LACP Port Counters 176
- Counter Information 176
- Table 3-9. LACP Settings 178
- Configuring Port Mirroring 185
- Configuring Rate Limits 186
- Command Attribute 187
- Showing Port Statistics 188
- Address Table Settings 194
- Displaying the Address Table 196
- Changing the Aging Time 198
- LGORITHM 199
- Displaying Global Settings 200
- VLAN Configuration 215
- VA: VLAN Aware 216
- VU: VLAN Unaware 216
- Displaying Current VLANs 220
- Command Attributes (CLI) 221
- Creating VLANs 222
- Configuring Private VLANs 230
- Associating VLANs 234
- Configuring Protocol VLANs 238
- Quality of Service 249
- Configuring a Class Map 251
- Console(config-cmap)# 253
- Creating QoS Policies 254
- Console(config-if)# 259
- Multicast Filtering 260
- ULTICAST 263
- ILTERING 263
- Enabling IGMP Filter Status 264
- Enabling IGMP Immediate Leave 264
- IGMP Filtering and Throttling 270
- Multicast VLAN Registration 275
- DHCP Snooping 284
- DHCP Snooping Configuration 286
- IP Source Guard 291
- Switch Clustering 296
- LUSTERING 297
- Cluster Member Configuration 298
- Cluster Member Information 299
- Cluster Candidate Information 300
- NTERFACE 301
- Telnet Connection 302
- Entering Commands 303
- Showing Commands 305
- Understanding Command Modes 307
- Exec Commands 307
- Configuration Commands 308
- Command Line Processing 310
- Command Groups 311
- PE (Privileged Exec) 313
- Line Commands 314
- Console(config)#line console 315
- Console(config-line)# 315
- Console#disconnect 1 325
- Console# 325
- General Commands 326
- Console>enable 327
- System Management Commands 332
- Device Designation Commands 333
- User Access Commands 334
- IP Filter Commands 337
- Web Server Commands 340
- Telnet Server Commands 344
- Secure Shell Commands 345
- Console#show ssh 354
- Event Logging Commands 357
- Table 4-18 Logging Levels 358
- 0 emergencies System unusable 359
- SMTP Alert Commands 365
- Time Commands 370
- System Status Commands 376
- Example 379
- Frame Size Commands 382
- Flash/File Commands 384
- Authentication Commands 391
- RADIUS Client 394
- TACACS+ Client 399
- Port Security Commands 401
- 802.1X Port Authentication 404
- Access Control List Commands 413
- IP ACLs 414
- Command Function Mode Page 415
- permit host 10.1.1.21 419
- Priority 01234567 421
- Queue 12034567 421
- ACL Information 422
- SNMP Commands 423
- Table 4-37 SNMP Commands 424
- Console(config)#snmp-server 425
- Console(config)# 425
- Field Description 440
- Command Mode 442
- Privileged Exec 442
- Interface Commands 443
- Broadcast Commands 456
- ROADCAST 457
- Mirror Port Commands 458
- Rate Limit Commands 460
- Link Aggregation Commands 462
- GGREGATION 463
- Address Table Commands 475
- Spanning Tree Commands 480
- VLAN Commands 496
- Console(config)#vlan database 497
- Console(config-vlan)# 497
- Configuring VLAN Interfaces 498
- Displaying VLAN Information 506
- XTENSION 515
- Priority Commands 519
- Queue 01234567 523
- Priority 20134567 523
- Multicast Filtering Commands 529
- IGMP Snooping Commands 530
- IGMP Query Commands (Layer 2) 535
- HROTTLING 543
- EGISTRATION 551
- IP Interface Commands 558
- IP Source Guard Commands 564
- DHCP Snooping Commands 569
- Switch Cluster Commands 578
- PECIFICATIONS 585
- Management Features 586
- Standards 587
- Management Information Bases 587
- ROUBLESHOOTING 589
- Using System Logs 591
- Glossary-1 593
- Glossary-2 594
- Glossary-3 595
- Glossary-4 596
- Glossary-5 597
- Glossary-6 598
- Glossary-7 599
- Glossary-8 600
Relacionado con productos y manuales para Accesorios De Computador Smc-networks SMC Tiger 10/100 SMC6128L2
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales