Smc-networks SMC Tiger 10/100 SMC6128L2 Manual de usuario descargar pdf (Pagina 146)

100

101

ONFIGURING

THE

WITCH

3-92

Configuring Port Settings for 802.1X

When 802.1X is enabled, you need to configure the parameters for the

authentication process that runs between the client and the switch (i.e.,

authenticator), as well as the client identity lookup process that runs

between the switch and authentication server. These parameters are

described in this section.

Command Attributes

•Port – Port number.

• Status – Indicates if authentication is enabled or disabled on the port.

(Default: Disabled)

• Operation Mode – Allows single or multiple hosts (clients) to connect

to an 802.1X-authorized port. (Options: Single-Host, Multi-Host;

Default: Single-Host)

• Max Count – The maximum number of hosts that can connect to a

port when the Multi-Host operation mode is selected. (Range: 1-1024;

Default: 5)

• Mode – Sets the authentication mode to one of the following options:

- Auto – Requires a dot1x-aware client to be authorized by the

authentication server. Clients that are not dot1x-aware will be denied

access.

- Force-Authorized – Forces the port to grant access to all clients,

either dot1x-aware or otherwise.

- Force-Unauthorized – Forces the port to deny access to all clients,

either dot1x-aware or otherwise.

• Re-authen – Sets the client to be re-authenticated after the interval

specified by the Re-authentication Period. Re-authentication can be

used to detect if a new device is plugged into a switch port. (Default:

Disabled)

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 605 606

Comentarios a estos manuales

Sin comentarios

Smc-networks SMC Tiger 10/100 SMC6128L2 Manual de usuario Pagina 146

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Smc-networks SMC Tiger 10/100 SMC6128L2