SMC Networks SMC6724L3 Manual de usuario descargar pdf (Pagina 601)

100

101

B-3

12. If using Windows HyperTerminal, click the “Transfer” button, and

then click “Send File....” Select the XModem Protocol and then use

the “Browse” button to select the required firmware code file from

your PC system. The “Xmodem file send” window displays the

progress of the download procedure.

Note: The download file must be a binary software file for this

switch.

13. After the file has been downloaded, you are prompted with “Update

Image File:” to specify the type of code file. Press <R> for runtime

code, <D> for diagnostic code, or <L> for loader code.

Note: If you select <L> for loader code, be sure the file is a valid

loader code file for the switch. If you download an invalid file,

the switch will not be able to boot. Unless absolutely necessary,

do not attempt to download loader code files.

14. Specify a name for the downloaded code file. File names are

case-sensitive, should be from 1 to 31 characters, not contain slashes

(\ or /), and the leading letter of the file name should not be a period

(.). (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

15. For example, the following screen text shows the download procedure

for a runtime code file:

Select>x

Xmodem Receiving Start ::

Image downloaded to buffer.

[R]untime

[D]iagnostic

[L]oader (Warning: you sure what you are doing?)

Update Image File:r

Runtime Image Filename : run_1013

Updating file system.

File system updated.

[Press any key to continue]

1 2 ... 596 597 598 599 600 601 602 603 604 605 606 ... 617 618

Comentarios a estos manuales

Sin comentarios

SMC Networks SMC6724L3 Manual de usuario Pagina 601

Comentarios a estos manuales

Relacionado con productos y manuales para Software SMC Networks SMC6724L3