SMC Networks SMC7824M/ESW Manual de usuario descargar pdf (Pagina 38)

ETWORK

LANNING

2-6

Application Notes

1. Full-duplex operation only applies to point-to-point access (such as

when a switch is attached to a workstation, server or another switch).

When the switch is connected to a hub, both devices must operate in

half-duplex mode.

2. To interconnect distinct VLANs or IP subnets, you can attach the

switch to a standard Layer 3 router. For network applications that

require routing between dissimilar network types, attach the switch to a

multi-protocol router.

3. As a general rule, the length of fiber optic cable for a single switched

link should not exceed:

• 1000BASE-SX: 550 m (1805 ft) for multimode fiber, duplex fiber

• 1000BASE-LX: 10 km (6.2 miles) for single-mode fiber, duplex

fiber

• 1000BASE-ZX: 70 km (43 miles) for single-mode fiber, duplex

fiber

However, power budget constraints must also be considered when

calculating the maximum cable length for your specific environment.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

Sin comentarios

SMC Networks SMC7824M/ESW Manual de usuario Pagina 38