SMC Networks SMC7800A/VCP Manual de usuario descargar pdf (Pagina 27)

ONFIGURING

THE

TCP/IP P

ROTOCOLS

3-3

Configuring the TCP/IP Protocols

To connect the CPE to a computer through its Ethernet port, the

computer must have an Ethernet network adapter card installed, and be

configured for the TCP/IP protocol. Many service providers configure

TCP/IP for client computers automatically using a networking technology

known as Dynamic Host Configuration Protocol (DHCP). Other service

providers may specify an IP configuration (known as a static IP address),

which must be entered manually.

Carry out the following steps to check that the computer’s Ethernet port is

correctly configured for DHCP.

Windows 95/98/NT

1. Click “Start/Settings/Control Panel.”

2. Click the “Network” icon.

3. For Windows NT, click the “Protocols” tab.

4. Select “TCP/IP” from the list of network protocols; this may include

details of adapters installed in your computer.

5. Click “Properties.”

6. Check the option “Obtain an IP Address.”

Windows 2000

1. Click “Start/Settings/Network/Dial-up Connections.”

2. Click “Local Area Connections.”

3. Select “TCP/IP” from the list of network protocols.

4. Click on “Properties.”

5. Select the option “Obtain an IP Address.”

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sin comentarios

SMC Networks SMC7800A/VCP Manual de usuario Pagina 27