SMC Networks SMC6724L3 INT Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
M
AKING
N
ETWORK
C
ONNECTIONS
4-2
MDI-X port using straight-through cable. To connect between two
switches/hubs that only have fixed MDI-X ports, the wiring crossover
must be implemented in the cable - known as a crossover cable.
The RJ-45 ports on the switch base unit support automatic MDI/MDI-X
operation, which means that they automatically detect the wiring in the link
and configure as MDI or MDI-X accordingly. So for these ports, you can
use standard straight-through twisted-pair cables to connect to any other
network device (PCs, servers, switches, hubs, or routers). However, note
that auto-negotiation must be enabled on these ports for automatic wiring
configuration to function properly.
See Appendix B for further information on cabling.
Connecting to PCs, Servers, Hubs and Switches
Caution: Do not plug a phone jack connector into an RJ-45 port.
This will damage the switch. Use only twisted-pair cables with
RJ-45 connectors that conform to FCC standards.
1. Attach one end of a twisted-pair cable segment to the device’s RJ-45
connector.
Figure 4-1. Making Twisted-Pair Connections
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 81 82

Comentarios a estos manuales

Sin comentarios