SMC Networks SMC6709L2 Manual de usuario descargar pdf (Pagina 90)

ONSOLE

NTERFACE

4-22

Configuring Tag-based VLANs

Use the VLAN Configuration menu to create tag-based VLANs.

Field Attributes

When the VLAN mode is set “802.1Q” or “802.1QwithGVRP” (on the

VLAN Configure page), the following attributes are displayed.

• PVID – VLAN ID assigned to untagged frames received on the port.

(Default: 1)

• Ingress Filter 1 (NonMember Pkt) – If ingress filtering is enabled,

incoming frames for VLANs which do not include this ingress port in

their member set will be discarded at the ingress port. (Default: Drop)

- Ingress filtering only affects tagged frames.

- If enabled, the port will discard incoming frames tagged for VLANs

which do not include this ingress port in their member set.

- If disabled, the port will accept any VLAN-tagged frame if the tag

matches a VLAN known to the switch.

- Ingress filtering does not affect VLAN independent BPDU frames,

such as GVRP or STP.

• Ingress Filter 2 (Untagged Pkt) – Sets the port to drop untagged frames.

If only tagged frames are accepted, the switch will only accept frames if

the frame tag matches a VLAN to which this port has been assigned.

(Default: Forward)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 149 150

Sin comentarios

SMC Networks SMC6709L2 Manual de usuario Pagina 90