SMC Networks SMC108DT Manual de usuario descargar pdf (Pagina 15)

TROUBLESHOOTING

SSyymmppttoomm

Power LED does not light after power on

Probable cause

Power outlet or power cord may be defective

Possible Solutions

. Check for loose connections.

. Check the power outlet by using it for another device.

. Replace the power cord.

SSyymmppttoomm

Link LED does not light after connection is made.

Probable Causes

Switch port, network card or cable may be defective.

Possible Solutions

. Check that the switch and attached device are both powered

on.

. Be sure the network cable is connected to both devices

. Verify that Category 5 cable is used for 100Mbps connections

and that the length of any cable does not exceed 100 meters

(328 feet). Check the network card and cable connections for

defects.

. Replace the defective card or cable if necessary.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

SMC Networks SMC108DT Manual de usuario Pagina 15