Smc-networks Wireless Broadband Router Manual de usuario descargar pdf (Pagina 10)

-9-

3. Set up WAN connection: Connect an Ethernet cable from the WAN port to your

cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN

connection.

4. Power on:

By connecting the power cord to the power inlet and turning the power switch on, this

product will automatically enter the self-test phase. When it is in the self-test phase,

the indicators M1 and M2 will be lighted ON for about 10 seconds, and then M1 and

M2 will be flashed 3 times to indicate that the self-test operation has finished. Finally,

the M1 will be continuously flashed once per second to indicate that this product is in

normal operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

Sin comentarios

Smc-networks Wireless Broadband Router Manual de usuario Pagina 10