Smc-networks SMC7004VBR Manual de usuario descargar pdf (Pagina 5)

7004VBR – Manual

CHAPTER 2 | Getting to Know the Barricade

The SMC7004VBR Barricade Cable/DSL Broadband Router is the perfect solution for the home/office

environment. This full-featured router offers:

• 4 - 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature

• 1 - 10/100 Mbps WAN port with Auto-MDI MDIX feature

• Comprehensive LEDs for network status and troubleshooting

• Reset Button

2.1 | LED Indicators

The Barricade includes LED indicators on the front panel that simplify installation and network

troubleshooting.

LED ON OFF FLASHING

POWER Receiving power Not receiving power N/A

WAN Good WAN connection

detected

No WAN connection

detected

Transmitting or receiving

traffic

LINK/ACT Good LAN connection

detected

No LAN connection

detected

Transmitting or receiving

traffic

10/100 Mbps LAN port operating at

100 Mbps

LAN port operating at 10

Mbps

N/A

Resetting the Barricade

The Reset button is located on the rear panel of the Barricade Broadband Router. Use a paper clip or

a pencil tip to push the Reset button.

Reset

If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds

then plug back in.

Restore Factory Defaults

If resetting the router does not resolve your issue, then you can follow these steps:

1. Leave power plugged into the router

2. Locate the reset button on the back panel, press and hold until WAN LED flashes off.

3. Release reset button.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Sin comentarios

Smc-networks SMC7004VBR Manual de usuario Pagina 5