Smc-networks SMC7004ABR V.2 Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 109
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
Connect the System
9
TCP/IP network protocol installed on each PC that needs to
access the Internet.
A Java-enabled web browser, such as Microsoft Internet
Explorer 5.0 or above, or Netscape Communicator 4.0 or
above installed on one PC at your site for configuring the
Barricade™ Router.
Connect the System
The Barricade™ Router can be positioned at any convenient
location in your office or home. No special wiring or cooling
requirements are needed. You should, however comply with the
following guidelines:
Keep the Barricade™ Router away from any heating devices.
Do not place the Barricade™ Router in a dusty or wet
environment.
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when you
install the Barricade™ Router.
Basic Installation Procedure
1. Connect the LAN: You can connect the Barricade™ Router to
your PC, or to a hub or switch. Run Ethernet cable from one
of the LAN ports on the front of the Barricade™ Router to your
computer’s network adapter or to another network device.
2. Connect the WAN: Prepare an Ethernet cable for connecting
the Barricade™ Router to a cable/DSL modem or Ethernet
router. Prepare a serial cable for connecting the Barricade™
Router to an ISDN TA or PSTN modem.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 108 109

Comentarios a estos manuales

Sin comentarios