Smc-networks Barricade BR14VPN Manual de usuario descargar pdf (Pagina 10)

SMCBR18VPN Front Panel: 8 LAN, 1 WAN, and 1 COM port

Port Type Description

5 VDC Receptor for power adapter:

5 VDC, 2 A (minimum)

WAN This is the connection for the Ethernet cable to

the Ethernet port on the cable or DSL modem

Port 1–4/8 These are the connections for Ethernet cables to

your Ethernet enabled computers

COM Serial port (connection for an analog modem or

console cable)

5 | Hardware Installation

The router can be placed anywhere in your office or home. No special wiring or cooling

requirements are necessary. However, you should comply with the following guidelines:

• Place your router on a flat, horizontal surface

• Be sure to place your router away from any heating devices

• Avoid dusty and/or humid areas

1) Setup LAN Connection: Connect an Ethernet cable from your computer’s Ethernet

port to one of the LAN ports of the router.

2) Step WAN Connection: Insert one end of the Ethernet cable into the WAN port on

the back panel of your router, and the other end to the cable/DSL modem. You may

connect an analog modem (optional) to function as a backup connection.

3) Power Up: The router automatically enters the self-testing phase once the power

cord is plugged into a wall outlet. When in self-testing phase, the M1 indicator LED

illuminates for about five seconds to indicate proper connection. The M1 LED flashes

twice as soon as the self-testing phase is completed. After the completion of the

self-testing phase, the M1 LED should flash once per second to indicate that the

router is functioning properly.

6 | Network Settings and Software Installation

Default Settings

IP Address 192.168.2.1

Subnet Mask 255.255.255.0

Administrator Password smcadmin

User Password password

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 72 73

Sin comentarios

Smc-networks Barricade BR14VPN Manual de usuario Pagina 10